Testing the battery charge voltage – RISCO Group Gardtec 490X User Manual
Page 103
Advertising
Testing the Battery Charge Voltage
IMPORTANT
To test the Battery Charge Voltage the battery must be connected to the battery leads
first. (See figure 1).
Only if the battery is connected, and the battery terminal voltage is greater than 8.5V,
will the charge circuit be switched on.
Page
102
GT490X Engineer’s Reference Guide
Fig 1.
PR5851 Rev12 490X Eng Ref Guide.qxd 10/05/2012 11:33 Page 102
Advertising