TA Triumph-Adler FAX 941 - Manual (Page 19)

1-10
Installation
Date en cours : 12 juillet 2004
\\Sct01002\Be31-doc\DOC 31 - En cours\Travaux en cours\Fax\MFL V 2\LU 251 524 337A MFL_V2 LASER PRO 346_348 GB\Installation
Gb.fm
I
NSTALLING THE PRINTER OUTPUT STACKER
 With both hands, slightly bend the centre part of the stacker upwards in order to insert its clips
into the notches located on the upper part of the printer. Release the stacker so that it recovers its
initial shape. If necessary, push at the base and at the centre of the stacker from underneath so
that is snaps into place behind notch A.
I
NSTALLING THE DOCUMENT FEEDER FOR SCANNING
 Fit the stacker by inserting its two toes into the notches provided at the rear of the terminal.
A