TA Triumph-Adler FAX 941 - Manual (Page 67)

5-4
Operation
Date en cours : 12 juillet 2004
\\Sct01002\Be31-doc\DOC 31 - En cours\Travaux en cours\Fax\MFL V 2\LU 251 524 337A MFL_V2 LASER PRO 346_348 GB\Operation Gb.fm
T
RANSMISSION OVER THE
P
UBLIC
S
WITCHED
T
ELEPHONE
N
ETWORK
(PSTN)
Immediate transmission
 Position the document (refer to paragraph Document positioning, page 5-1)
 Enter the fax number or choose your dialling mode (refer to paragraph Dialling, page 5-2) then
press
The "Line" icon flashes during the call phase, it stays lit when both faxes are in communication
 At the end of transmission the initial screen is displayed
Delayed transmission
This function allows you to transmit a document at a later time.
To program a postponed transmission you need to identify the subscriber number, transmission time,
feeder type and number of pages.
To delay the transmission time of your document :
 Position the document (refer to paragraph Document positioning, page 5-1)
 Select M 31 OK - FAX / TRANSMISSION
 Enter the subscriber number you wish to program at a different time or choose your dialling
mode (refer to paragraph Dialling, page 5-2) and confirm with OK
 Next to the current time, enter the new time and confirm with OK
 Adjust the contrast and confirm by pressing the OK key
 Select the feed type, FEEDER or MEMORY and confirm with OK (refer to paragraph Document
feed type, page 3-4)
 You may enter the number of pages before transmission and confirm with OK
 Confirm postponed transmission by pressing key
Your document is stored and will be sent at the new time.
Transmission with auto redial
This function allows you to monitor the dialling operation during a fax transmission. In this case, the
maximum transmission rate will be 14400 bps.
This function allows for example:
• to hear if the subscriber’s fax is engaged and if so, choose the moment when the line is clear to
start the document transmission
• to control the communication progress in case of uncertain numbers, etc