Erase an sms, P. 3-20, Rase – TA Triumph-Adler FAX 941 User Manual
Page 53
3-20
Setting your machine
Date en cours : 12 juillet 2004
\\Sct01002\Be31-doc\DOC 31 - En cours\Travaux en cours\Fax\MFL V 2\LU 251 524 337A MFL_V2 LASER PRO 346_348 GB\Setting your
machine.fm
To do so, you have a true editor at your disposal:
• for the upper case letters, use the
×
key or
key
• to move inside the data entry field, use the
or
keys
• to move in the text from one word to another, press the C
TRL
key and one of the navigator keys
• to go to the next line, use the
key
• to delete a character (by moving the cursor to the left), use the Í or C key
Press
to confirm your entry
Dial the number of the recipient (mobile phone or any other SMS-compatible device) in one of
the following ways:
• dial the number by means of the numerical keypad
• enter the first letters of the recipient name
• press the
key until the required name appears (names are classified in alphabetical order)
• press the
key to display the required name. The screen displays the last person you have sent
an SMS to, use the
or
keys to select a different number
Your SMS may be sent to only one person or to several people. To send an SMS:
• to only one person, press the
key to confirm
• to several people:
- press the
key and enter the next person's name,
- repeat the operations as many times as required (10 persons max.). Press the
key to
confirm.
SENDING SMS
is displayed as the SMS is being sent.
Once
SENDING SMS
is no longer displayed, the SMS has been sent and the recipient number is saved
( key).
• If SMS appears, then the SMS has been put on hold and a further attempt will take place a couple
of minutes later. To immediately execute or cancel transmission, refer to paragraph Transmission
waiting queue, page 5-8.
• To check the SMS has been sent properly, you may print the transmission/reception log
(
M
E
RASE
AN
SMS
Proceed as follows to erase an SMS :
M 43 OK - SMS SERVICE / DELETE SMS
Select the messages to erase
M 431 OK - SMS SERVICE / DELETE SMS / SELECTED
Select SELECTION using keys
and
and validate with OK key.
Select a message using keys
and
and validate with OK key.