TA Triumph-Adler FAX 941 - Manual (Page 78)

Operation
5-15
Op
er
atio
n
Se
ttin
g y
ou
r
mach
ine
Ge
tti
ng
sta
rt
ed
Direc
to
ry
M
ainte
na
nc
e
Sa
fe
ty
Co
nt
en
ts
Insta
lla
tio
n
Date en cours : 12 juillet 2004
\\Sct01002\Be31-doc\DOC 31 - En cours\Travaux en cours\Fax\MFL V 2\LU 251 524 337A MFL_V2 LASER PRO 346_348 GB\Operation Gb.fm
P
RINTING THE MACHINE SETTINGS
At any moment, you may print the list of your fax’s parameter settings to control any changes
possibly made to the default parameters.
Printing the machine settings:
M 54 OK - PRINT / SETUP
Your fax prints the list of stored parameters.
M
EMORIZING A SEQUENCE OF KEYS
You may memorize a sequence of keys (for example, to send a fax directly to one or multiple
subscribers, to call this subscriber or to get access to a specific menu, etc.).
This sequence is registered in one of the keys F1 or F2 (as you want).
Then, by pressing one of these keys, you will execute the registered sequence.
Remark : By default, Scan to PC function is programmed on F1 key and Scan to FTP function is programmed on
F2 key.
To register a sequence (for example, in key F1)
 Press key M, then F1: you will enter the menu option
From this moment, all the key pressings are memorized in the key F1.
 Press key F1 to register the sequence if you are still in the menus. The sequence
memorizing is automatic if you have already exited the menu
Example: to memorize a fax sending to various subscribers in key F1:
 Press keys M then F1
 Press keys 3, 1 then OK
 Enter the subscriber fax number
 Press key and enter the second subscriber fax number or subscribers list
 Repeat this last step for all subscribers or subscribers lists
 Press key F1: the sequence is memorized
To send a fax directly to your subscriber (key F1 preset)
 Press F1
 Position the document (refer to paragraph Document positioning, page 5-1)
 Press the key