TA Triumph-Adler FAX 941 - Manual (Page 34)

3-1
Date en cours : 12 juillet 2004
\\Sct01002\Be31-doc\DOC 31 - En cours\Travaux en cours\Fax\MFL V 2\LU 251 524 337A MFL_V2 LASER PRO 346_348 GB\Setting your
machine.fm
3 S
ETTING YOUR
MACHINE
The parameters of your unit must be set properly to obtain quality transmission and reception.
You can set the parameters of your unit by browsing through the menus or remotely. The parameters
are set remotely through the embedded web server via a PC registered in the network (depending on
model).
R
EMOTE SETTING OF PARAMETERS
(
DEPEN
-
DING ON THE MODEL
)
E
MBEDDED WEB SERVER
The same parameters can be set locally or remotely.
Prerequisites
To set your unit remotely, you need:
A Web browser (Internet Explorer version 4 or higher for optimum operation),
Define the local network setting parameters of your unit (IP address, sub-network mask...). Your
network administrator will give these parameters to you. When you have this data, refer to paragraph
Local Area Network (LAN) settings (depending on model), page 3-10 in order to complete the
necessary fields