TA Triumph-Adler FAX 941 - Manual (Page 39)

3-6
Setting your machine
Date en cours : 12 juillet 2004
\\Sct01002\Be31-doc\DOC 31 - En cours\Travaux en cours\Fax\MFL V 2\LU 251 524 337A MFL_V2 LASER PRO 346_348 GB\Setting your
machine.fm
Print fax messages stored in the memory
M 381 OK - FAX / FAX ANSW. / PRINT
 If you have defined an access code for your fax answering machine, enter it and press OK.
Documents received and stored in the memory are printed.
Reception without paper
Your fax offers you the possibility to either accept or refuse document reception if your printer is
unavailable (no paper...).
If your fax printer is unavailable, you may choose between two modes of reception:
• reception mode WITHOUT PAPER , your fax saves the incoming messages in the memory,
• reception mode WITH PAPER , your fax refuses all incoming subscribers.
To select the reception mode:
M 241 OK - SETUP / RECEPTION / REC. PAPER
 Select the option WITH PAPER or WITHOUT PAPER and confirm your choice with OK.
Remark : Paper out is indicated by a beep and a message on the screen.
Received faxes are then stored in memory (icon "Fax messages" flashing) to be printed as soon as you add paper
into the feeder.
Number of copies
You may print incoming documents more than once (1 to 99).
To set the number of each document received:
M 242 OK - SETUP / RECEPTION / NBR OF COPIE
 Enter the wanted number of copies and confirm with OK.
At each document reception, your fax will print the number of copies requested.
Relay broadcast
Your fax machine (initiator) can relay a document, in other words, transmit a document to your
subscribers via a remote fax and with a precise relay list.
To do this the initiator fax and the remote fax must both have the relay function.
To relay you need to supply the remote fax with the document and the relay list number. The remote
fax will then transmit this document to all subscribers on the list.
Once the relay is activated by your fax and as soon as the document is received by the remote fax, the
document is printed before relaying to all subcribers on the list.
To activate relay from your fax machine:
 Insert the document to relay (refer to paragraph Document positioning, page 5-1).
 Select M 37 OK - FAX / BROADCAST.
 Enter the remote fax number where you will relay to or choose your dialling mode (refer to
paragraph Dialling, page 5-2) and press OK.
 Enter the relay list number used by the remote fax and press OK.