TA Triumph-Adler FAX 941 - Manual (Page 65)

5-2
Operation
Date en cours : 12 juillet 2004
\\Sct01002\Be31-doc\DOC 31 - En cours\Travaux en cours\Fax\MFL V 2\LU 251 524 337A MFL_V2 LASER PRO 346_348 GB\Operation Gb.fm
Caution -
If you forget to position the document to be transmitted, the addressee will receive a
blank page.
Remark : Since the addressee’s number is generally on the document to be transmitted, you may also dial before positio-
ning the document.
C
HOOSING THE RESOLUTION
/
CONTRAST
Resolution
You have 4 modes for document transmission.
The mode choice depends on the type of document to be transmitted:
• Normal mode, symbolised by Std at the bottom of the display screen. To be used for good quality
documents, without drawings or small details
• Fine mode, symbolised by Fine at the bottom of the display screen. To be used for documents
with drawings or small characters
• Super Fine mode, symbolised by SFine at the bottom of the display screen. To be used for docu-
ments with very fine or small character drawings
• Photo mode symbolised by Photo at the bottom of the display screen. To be used for photogra-
phic documents
To select the resolution mode:
 Press key as many times as necessary to select the required mode. A icon on the screen
shows the current mode.
Contrast
You can set the contrast if your document is too light or too dark. If the document is light, you must
raise the contrast and if it is dark, you must reduce it.
To set the contrast:
 Press as many times as necessary to choose the desired contrast, as shown by the position of
a cursor.
D
IALLING
From the directory
Dialling alphabetically
 Enter the first letter of your subscriber’s name with the alphanumeric keypad, then add the
remaining letters until your subscriber’s name is complete.