TA Triumph-Adler FAX 941 - Manual (Page 25)

1-16
Installation
Date en cours : 12 juillet 2004
\\Sct01002\Be31-doc\DOC 31 - En cours\Travaux en cours\Fax\MFL V 2\LU 251 524 337A MFL_V2 LASER PRO 346_348 GB\Installation
Gb.fm
 Make sure the On/Off switch is set to 0 (Off).
T
ELEPHONE AND
LAN
CONNECTION
 Plug end of the telephone line (1) into the connector on the fax machine (A), and the other end
into the wall telephone socket.
 LAN connection (depending on model). Plug end of the LAN cord (as provided by your network
administrator) into port (B) of your fax machine and the other end into your local network port
dedicated to your fax machine.
P
OWER LINE CONNECTION AND SWITCH
-
ON
Caution -
Refer to safety procedures in the Safety Chapter.
 Plug end of the main power cord (2) into the connector (D) on the fax machine, and the other end
in the wall outlet.
 Set the On/Off switch to position 1 (On).
After a few seconds, when the printer has warmed up, the date and time will appear. To set the language
and the time of your terminal, refer to paragraph Setting your machine, page 3-1.
Key to the diagram:
A: Telephone line connector
B: LAN connector (depending on
model)
C: USB port
D: AC power connector
(model depending on country)
1: Line cord
(model depending on country)
2: AC power cord
(model depending on country)