TA Triumph-Adler FAX 941 - Manual (Page 41)

3-8
Setting your machine
Date en cours : 12 juillet 2004
\\Sct01002\Be31-doc\DOC 31 - En cours\Travaux en cours\Fax\MFL V 2\LU 251 524 337A MFL_V2 LASER PRO 346_348 GB\Setting your
machine.fm
3 - TX SPEED 1 - 33600
2 - 14400
3 - 12000
4 - 9600
5 - 7200
6 - 4800
7 - 2400 Transmission speed for outgoing documents.
For a quality telephone line (compatible, no echo),
communications occur at maximum speed.
However, it may be necessary to restrict the transmission
speed for some calls.
4 - ECHO PROTECT 1 - WITH
2 - WITHOUT If this parameter is on, the on-line echo will be reduced during
long distance calls.
6 - EPT MODE 1 - WITH
2 - WITHOUT For some long distance calls (satellite), the on-line echo may
disturb the call.
7 - COM. DISPLAY 1 - SPEED
2 - PAGE NUMBER Choice between transmission speed displayed or number of
the page in progress.
8 - ECO ENERGY 1 - WITHOUT
2 - DELAY 5 MIN
3 - DELAY 15 MIN
4 - DELAY 30 MIN
5 - STDBY PERIOD Choosing the printer standby delay: the printer will switch to
standby after a delay (in minutes) of NON-operation or during
the period of time of your choice.
10 - RX HEADER 1 - WITH
2 - WITHOUT If this parameter is on, all documents received by your fax
will include the subscriber’s header with his name, number (if
available) fax print date and the page number.
11 - RX SPEED 1 - 33600
2 - 14400
3 - 9600
4 - 4800
5 - 2400 Transmission speed for incoming documents.
For a quality telephone line (compatible, no echo),
communications occur at maximum speed.
However, it may be necessary to restrict the transmission
speed for some calls.
12 - RINGS 2 TO 9 Number of rings to automatically start your machine.
20 - E.C.M. 1 - WITH
2 - WITHOUT This parameter helps correct the calls made on
disturbed telephone lines. It is used when the lines are weak
or too noisy. Transmission times may be longer.
70 - NET VALID 06:01 TO 21:59 This parameter lets you modify the period when the fax
connects automatically to the Internet.
This menu is available only if the connection type is set to
PERIODIC ( M 941 ).
71 - NET ACTIVE 7 DAYS / WEEK
MON TO FRI This parameter lets you select the days of the week when the
fax connects automatically to the Internet.
This menu is available only if the connection type is set to
PERIODIC ( M 941 ).
Parameter Setting Signification