TA Triumph-Adler FAX 941 - Manual (Page 45)

3-12
Setting your machine
Date en cours : 12 juillet 2004
\\Sct01002\Be31-doc\DOC 31 - En cours\Travaux en cours\Fax\MFL V 2\LU 251 524 337A MFL_V2 LASER PRO 346_348 GB\Setting your
machine.fm
Access to the Internet is possible thanks to an Internet service provider (ISP). The provider puts at your
disposal a server, or computer system which allows you to connect to the Internet and your mailbox
through your telephone line.
Before worldwide transmission, you must:
• take out an Internet subscription from an Internet Service Provider (ISP),
• check that all initialisation parameters correspond to those provided by your ISP,
• perform the proper settings, if needed, for the Internet connection.
You may then connect yourself to the Internet via your ISP to send and receive fax-Internet or
E-mails. Both operations will be performed during an Internet connection.
I
NITIALISATION PARAMETERS
You must define or, at least check all parameters needed to identify yourself with the Internet.
Your ISP will provide you with these parameters as soon as you are registered with them.
The parameters are divided in four categories:
• connection, allows you to identify the dial up number, the connection identifier and the connec-
tion password,
• message service, allows you to define the message service identifier, the message service pas-
sword and the E-Mail address,
• servers, allows you to identify the name of the OP address of Internet SMTP providers (send) and
POP3 (MBX reception) and the address of DNS 1 and DNS 2 servers. The server address is made
up of 4 groups of 3 digits maximum, separated by dots.
• SMTP Authentification, used to activate the authentification protocol when the SMTP server
used requests this to end e-mails.
Access to connection and message service parameters
M 91 OK - INTERNET / SUPPLIER
 Select the Internet provider from the list NO ACCESS , PROVIDER_1 , PROVIDER_2 ,
PROVIDER_3 , PROVIDER_4 , PROVIDER_5 , PROVIDER_6 or LOCAL NETWORK , and
press OK.
Choosing
NO ACCESS disables access to Internet functions. OK.
M 921 OK - INTERNET / INIT PROVIDER / CONNECTION
 Enter the CALL NUMB. , press OK.
 Enter connection IDENTIFIER
1
, press OK.
 Enter connection PASSWORD , press OK.
M 922 OK - INTERNET / INIT PROVIDER / MESS. SERV
 Enter Email IDENTIFIER, press OK.
 Enter Email PASSWORD, press OK.
1. If the identifier has more than 16 characters, the text will automatically slide over to the left.