TA Triumph-Adler FAX 941 - Manual (Page 40)

Setting your machine
3-7
Op
er
atio
n
Se
ttin
g y
our
ma
ch
in
e
Ge
tti
ng
sta
rt
ed
Direc
to
ry
M
ainte
na
nc
e
Sa
fe
ty
Co
nt
en
ts
Insta
lla
tio
n
Date en cours : 12 juillet 2004
\\Sct01002\Be31-doc\DOC 31 - En cours\Travaux en cours\Fax\MFL V 2\LU 251 524 337A MFL_V2 LASER PRO 346_348 GB\Setting your
machine.fm
 You may enter the time you wish to transmit the document next to the current time and
press OK.
 If you wish to modify the document feed type, select one of the options FEEDER or
MEMORY , then press OK.
 If you wish, you may enter the number of pages of your documents before transmitting.
 Activate relay by pressing key .
The document in the feeder will be relayed either immediately or at a later time (according to your
choice) to the remote fax which will relay the document.
Fax or PC reception (depending on model)
M 243 OK - SETUP / RECEPTION / PC RECEPT.
This menu, combined with a software program installed on your PC (supplied or on option
depending on model) will enable you to select the machine you wish to receive the documents on:
• fax.
• PC.
• PC if available, fax otherwise.
For more details, please refer to the instruction manual provided with the software kit.
T
ECHNICAL PARAMETERS
As delivered your fax is preset by default. However, you may adjust it to meet your requirements
by resetting the technical parameters.
To set the technical parameters:
M 29 OK - SETUP / TECHNICALS
 Select the desired parameter and confirm with OK.
 With the keys or , modify the parameter settings by following the table below and
press OK.
Parameter Setting Signification
1 - SCANNING
MODE 1 - NORMAL
2 - FINE
3 - SFINE
4 - PHOTO Default value of the scan mode resolution for the documents
to be transmitted.
2 - TX HEADER 1 - WITH
2 - WITHOUT If this parameter is on, your header will appear on all
documents sent to your subscribers with your name, number,
date and number of pages.