PLANET NAS-3410 - Manual (Page 23)

15
Chapter 4
Network Configuration
This chapter details concepts and procedures for configuring the NAS-3410 and establishing the
system that can communicate among various OS platforms. Management protocol and email
notification setting are also covered in this chapter.
4.1 Network Information
The Network Information screen is the summary of the current network settings of the NAS-3410.
It provides the administrator a quick look of the basic network setting of the NAS-3410.
The Information page is divided into two sections. The Network Protocols section displays the
current network protocol settings of the server.
Protocol Type Display network protocol supported by the server
Configuration Current status of the network protocol. Status: Enabled or Disabled
Security Policy Display type of the security policy of the network protocol
The TCP/IP Suite Settings section shows the various TCP/IP settings of the server.
Port Display Ethernet port #.
IP Address An identifier for a network resource on a TCP/IP network.
Subnet Mask A subnet mask used to determine what subnet an IP
address belongs to.
Gateway A node on a network that work as a point of entry to another
network
Speed/Mode 10/100/1000 Mbps and full/half Duplex
Network Teaming Mode Display the current network teaming mode.
Obtain TCP/IP settings from Display the IP settings is either assigned automatically from
DHCP or assigned manually
WINS Server IP Address Windows Internet Naming Service (WINS), manages the
association of network resources name and its IP addresses
without the user or an administrator having to be involved in
each configuration change.
DNS Server IP Address IP address of the domain name system (DNS) server which
located the domain names and translate it into IP addresses.
DNS Suffix Display the DNS suffix