PLANET NAS-3410 - Manual (Page 62)

open the NAS-3410.
For example, open the Connect to Server window in Finder.
You can either type the IP address of NASServer in the Address field. And click Connect to put it
on Desktop. Or you can click AppleTalk in the middle left window pane to find the zone and the
server. Once you find the server, click Connect to put it on Desktop.
8.5 Accessing from FTP Clients
You can set an FTP home directory in the NAS-3410 for user access. Login authentication is done
by checking the ACL of the FTP home directory. During an FTP session, the server always checks
ACL when it receives any FTP requests, such as ls, put, get, etc. Local accounts and domain
accounts are both supported, depending on the security policy.
After setting the NAS-3410 to operate in the workgroup mode or the domain mode, follow the
steps below to configure for FTP access.
1. Enable the FTP Data Access feature.
Open the administration page and enter the Network ÆFTP menu. Check the Enable FTP
Data Access check-box and specify the security policy. In the workgroup mode you can only
select Local account authentication as the security policy. In the domain mode, you can
60