PLANET NAS-3410 - Manual (Page 95)

91
Installation
System Requirement
• IBM PC or compatible with 80486 processor or higher
• At least 8 MB of free memory (16 MB is recommended)
• Minimum 5MB of free hard disk space
• VGA or higher resolution monitor
• Microsoft
Windows 95/98/98SE/ME, Windows NT/2000/XP
Installing TCP/IP Protocol for Microsoft Networks
NAStart communicates with NAS Servers through the TCP/IP protocol. You must install Client for
Microsoft Networks and the TCP/IP protocol in Windows to use NAStart.
Installing NAStart
You are ready to install this utility if the TCP/IP protocol is installed in your computer. To install
NAStart, insert the Utility CD into the CD-ROM drive. On the auto-run interface, click “NAStart
Utility”. If the auto-run interface does not appear, go to E:\Utility\NAStart and run NAStart.exe,
where E is the drive letter of the CD-ROM drive.
Follow the instructions in the setup wizard to install NAStart. It will create shortcuts on Desktop
and in the Programs folder of the Start menu.