Escort 3016B - Manual (Page 114)

15 Ethernet interface
Page 16
14.5.8.Triggers
The trigger that you have to program depends on the latest command sent (alarm,
trigger start, trigger stop, etc.)
HEADER PARAMETERS EXAMPLES
TRIG:LOG P1 P1 TRIG:LOG "XXXXXXXXXXXXXXX1"
Defines the logic channels trigger
P1=16 bits trigger values beetween "
triggerinf on Logic Channel VL1
TRIG:CHan P1,P2,P3 P1=Number of the channel (A1,A2 etc...) TR:CH A1,S1,EDGEP
P2=Threshold ( S1 ou S2)
P3=POS or NEG
triggering on rising edge of channel A1 (threshold
1)
for rising edge or falling edge
TRIG:COm P1 Defines the complex trigger TRIG:CO DEL;CO:DEL 2,S;RESET; ADD
A1,S1,POS; ADD A2,S1,NEG
P1=OR, AND or DELta which is :
one of the thresholds (OR)
all the thresholds (AND)
We have 2 thresholds : S1 on A1 and S1 on A2
slope (DELta)
TRIG:COm:DELta P1,P2 Defines the slope
P1 = value ( from 1 to 500)
P2 = Sec or MIN or HOURS
TRIG:COm:REset reset trigger : delete all conditions
TRIG:COm:ADD P1,P2,P3 Add a threshold to the trigger
P1=Number of the channel (A1,A2 etc...)
P2=Threshold ( S1 or S2)
P3=POS or NEG
for rising edge or falling edge
TRIG ? Returns the value of pointed trigger