Escort 3016B User Manual
Page 41
4
Use
Page 12
4.7.2. Display XY
The XY display mode allows you to display the validated channels in real time on screen, one
versus the others.
One of the channels defines the extension on the horizontal axis; the other channels define the dots
on the vertical axis.
Grid pattern: to customise the grid pattern of the XY display
You can select, either a predefined grid pattern with selection of the colour, either a customised
grid pattern (copied from an USB key or ftp to the hard disk)
This BMP file size is 640*640 pixels with 24 colours, the predefined grid (gridxy.bmp) is in the
base directory of the hard disk.
You can use paint (from Microsoft) or a free software (paint.NET,gimp word etc..)
to create the BMP file.
With paint software, to create a line you must give the two points coordinates.
Theses coordinates are displayed on bottom left corner of the window.
Point or vector: display the point or the line between successive points .If the channel
frequency is higher than the display point frequency (0.1Hz) you can have a false display
X channel: choice of the channel on the horizontal axis (sweep)
Y channel:
-
One: only one way on the vertical axis; choice of this channel on the following
parameter
-
Several: access to the validation of the channels on the following parameter
4.7.3. Digital display
The Digital display mode allows you to display the digital values of the validated channels in real
time on the screen.
No action is possible in this mode.
4.8.
Direction keys
They move the reverse video zone on to the parameter to modify.
You can modify the parameters with the thumb wheel, with a mouse if it is connected, or with an
external keyboard.