Escort 3016B - Manual (Page 33)

4 Use
Page 4
 Alarm B: use of the B alarm output (logical 0-5V output)
- Without: no condition is controlling the output; it remains always low (0V)
- Trigger: control by association of the analogical or logical channels on several
thresholds (cf. chapter Triggering)
- Paper error: control by lack of paper or opening of the door of the printing
block (ESCORT 3008B only)
In any case, the output is low (0V) if the condition is true.
 Alarm C: id. Alarm B
 Date modification: setting the hour and date for the appliance
 Ethernet: modification of the TCP/IP address and of the address mask
 Position Max of bargraph : moving direction of the bargraph of each channel on the screen
- Right : maximum value of the channel on the right
- Left : maximum value of the channel on the left
 Electrical adjustment: calibration of the offsets of the channels, return to the factory
adjustments
 Software update: updating of the internal software (see chapter Presentation)
The window at the bottom of the screen shows:
- The current TCP/IP address
- The number of the current version of the internal software
- The number of detected channels