Escort 3016B - Manual (Page 32)

4 Use
Page 3
4.3. Set up key
General configuration of the appliance, control of the alarm outputs, TCP/IP network address,
calibration of the channels, updating of the internal software.
 Language: choice of the language used by the appliance
 Screen shut-off: turns off the back-lighting of the LCD screen, adjustment of the delay
 Configuration: initialisation of the appliance in its default configuration, saving / loading in
internal ROM memory, on internal hard disk or USB key, thermal paper printing
ATTENTION: you will loose the current configuration
 Alarm A: use of the A alarm output (relay contact)
- Without: no condition is controlling the contact; it remains always open
- Trigger: control by association of the analogical or logical channels on several
thresholds (cf. chapter Triggering)
- Paper error: control by lack of paper or opening of the door of the printing
block (ESCORT 3008B only)
In any case, the contact is open if the condition is true.