Escort 3016B - Manual (Page 64)

8 Direct mode
Page 6
- module A
- Channel A1 ON
 Channels set up key
- select the range and the zero so that the channel is centred on the paper
Recording:
Press the "Start/Stop" key.
The writing begins at a 5mm/s rate and waits for the trigger start condition.
When both channels A3 and A4 have reached the programmed threshold on increasing, the trigger
start is validated.
The writing turns to a 50mm/s rate and keeps on 50 cm, thus 10 s.
After these 10 seconds, it turns directly to the configuration 3.
When the new configuration is ready, the recorder proceeds as if the user had pressed the
"Start/Stop" key.