Escort 3016B - Manual (Page 19)

2-Presentation
Page 2.6
 START/STOP : launch of the printing on thermal paper in DIRECT
MODE on ESCORT 3008B, launch of the acquisition in any other MODE
 thermal paper-feed key for ESCORT 3008B: quick advance of the paper through
continuous press
 F1 to F10 keys: choice of the parameter to modify before action on the thumb
wheel
2.5. THUMB WHEEL
It makes it possible to modify the value of the selected parameter through increment / decrement. In
trace visualisation f(t), it also makes it possible to move the measure cursors on the screen.
2.6. LOCKING THE KEYBOARD
Simultaneously triggering the and keys locks the keyboard. The message
Keyboard locked appears on the right top of the screen.
2.7. USE OF A MOUSE
You can use the recorder with a mouse connected on the mouse-port PS2 or on an USB connector.
You can then use it in every parts of the screen:
- directly display the configuration of a channel by clicking on its bargraph (zone 9)
- validate / invalidate a channel by clicking on its ON/OFF indication (zone 9)
- display the configuration of the logical channels (zone 7)
- validate / invalidate the logical channels with its ON/OFF indication (zone 7)
- choose one of the functions of the recorder (zone 3)
- access the help window (zone 2)
- select a parameter to modify (zone 4)
- modify the parameter selected by clicking the propositions (zone 5): right mouse-key to
increment, left mouse-key to decrement or central wheel in both senses
- move the measure cursors in direct visualisation and memory output
2.8. USE OF AN EXTERNAL KEYBOARD
You can also use an external keyboard connected on the keyboard port PS2 or an USB connector.
The ESC key displays the main functions of the recorder.
You can then access the functions with the keys F1 to F10 of the keyboard.
The keys Pg UP and Pg Down can be used instead of the thumb wheel to increment /
decrement the parameters.
F10