Escort 3016B User Manual
Page 47
5
Diagrams
Page 2
Position V.Log: position of the display of the logical channels above or below the diagrams of
the analogical channels
Validate: validation of the previous parameters (Number diagrams, height and position of the
logical channels) in order to take the modifications into account
Position of the channels: place of the channels in the diagrams; select the channel you want
and press the arrows to move it
Change Diagrams: modification of the size of each diagram; select the channel you want and
enter its start and height in mm.
Don t forget to validate your modifications to have them taken into account
After selection of the number of diagrams or validation of the logical channels,
press Validate ; the appliance dispatches the diagrams on the screen (and also
on the paper) automatically in equal sizes
5.1. Positions of the channels
Press the Position of the channels key to dispatch the channels in the diagrams.