Escort 3016B - Manual (Page 65)

9 Memory mode
Page 1
9. MEMORY MODE
This chapter describes the Memory mode designed to record in real time into the internal memory
the measures achieved on the channels.
You can trigger the start and stop of the plotting under various conditions.
You can activate a simultaneous saving of the measurements in an internal memory or in a file.
9.1. Configuration and triggering of the acquisition
Press the Trigger key.
Definition of the acquisition into internal memory.
 Sample Rate: sampling rate of the channels
- internally rated from 1 s to 20 min
- externally rated through the logical channel 16
 Blocks: division of the internal memory into blocks
- 1, 2, 4, 8, 16, 32, 64 or 128