Escort 3016B - Manual (Page 60)

8 Direct mode
Page 2
 Mode: choice of the printing mode
- F(t): printing a graph versus the time
- Numeric: printing digital values of the measures in a table
 Paper speed: printing speed
- internally rated feed from 1 mm/h up to 200 mm/s
- externally rated feed through the logical channel 16
 Grid Pattern: definition of the grid pattern plotted on the paper
- none, every 5 mm, 10 mm or with an integer number of divisions
- fine or wide, i.e. with or without subdivisions
- access to the Change Diagrams to organise the presentation of the channels
on the paper (see chapter Diagrams)
 Title: giving a title (max. 124 characters) for printing. It will appear at the top of the
paper sheet.
 Time: type of time reference, printed at the beginning of the plotting and with every
annotation
- absolute: real-time hour and date
- relative: setting to zero at the beginning of the plotting, printing the elapsed time
after each new annotation.
 Boundary: possibility to write the limits of each channel (min-max) and the position of
zero at the end of the plotting
 Annotation: possibility to have annotations while printing
- no, at the beginning of the plotting, on an alarm or on a length of paper
- made of the name, the number, the current value or the range of the channels
 Write Message: you can also write a text directly on the paper
- after entering your text, press the Write key: the text will be immediately
plotted on the paper
- if the plotting has begun, it will be paused and will start again when the line is
written.
 Plot a BMP file: you can write a file under BMP format (bitmap windows). The BMP
file must be single colour (height 2000 pixels maximum).The must be on the hard disk,
and can be copied with an USB key or via ftp link
.