Kramer 4 x 4 Seamless AV Matrix Switcher/Multi-Scaler - Manual (Page 100)

VSM-4x4A – VSM-4x4A RS-232/Ethernet Communication Protocol 93
10.3.6 Communication Commands
Command Description
NET-MAC Get MAC address
NET-IP
Set/get IP address
NET-GATE Set/get gateway IP
NET-MASK
Set/get subnet mask
NET-DHCP
Set/get DHCP mode
ETH-PORT Set/get Ethernet port protocol
10.3.6.1 NET-MAC
Functions Permission Transparency
Set: - - -
Get:
NET-MAC?
End User Communication
Description Syntax
Set:
Get: Get MAC address
# NET-MAC? CR
Response
~ nn@ NET-MAC SPmac_addressCR LF
Parameters
mac_address – Unique MAC address. Format: XX-XX-XX-XX-XX-XX where X is hex digit.
K-Config Example
Get the MAC address:
“#NET -MAC? XX-XX-XX-XX-XX- XX”,0x0D
10.3.6.2 NET IP
Functions Permission Transparency
Set:
NET-IP
Administrator -
Get: NET-IP? End User Communication
Description Syntax
Set: Set device IP address
# NET-IP SPP1CR
Get: Get device IP address
# NET-IP? CR
Response
Set: ~ nn@ NET-IP SPip_addressSPOKCRLF
Get: ~ nn@ NET-IP SPip_addressCR LF
Parameters
P1 – IP address, in the following format: xxx.xxx.xxx.xxx
Notes
For proper settings consult your network administrator.
K-Config Example
Set the IP address to 192.168.1.39:
“#NET - IP 192.168.001.039”,0x0D