Kramer 4 x 4 Seamless AV Matrix Switcher/Multi-Scaler - Manual (Page 27)

20 VSM-4x4A – Controlling the VSM-4x4A
6 Controlling the VSM-4x4A
The VSM-4x4A can be controlled via:
•
Front panel buttons (see Section 6.1 )
•
OSD menu (see Section 6.2 )
•
RS-232 serial commands transmitted by a touch screen system, PC, or other
serial controller (see Section 6.3 )
•
The ETHERNET (see Section 6.4 ), via the Web pages
•
The infrared remote control transmitter (see Section 6.5 )
6.1 Controlling via the Front Panel Buttons
VSM-4x4A includes the following front panel buttons:
•
Input selector buttons for selecting the required INPUT, HDMI (1 to 4) and
OUTPUT/WINDOW selector buttons (A to D)
•
ALL (to connect a selected input to all the outputs) and OFF (to disconnect a
selected output from the inputs) buttons
•
MODE buttons: MATRIX, VIDEO WALL, DUAL and QUAD
•
TAKE button
•
STO and RCL buttons
•
IDENTIFY button to identify the inputs connected to the outputs
•
MENU, ENTER, and up, down, left and right arrow buttons for the OSD menu
•
RESET TO XGA/720p and PANEL LOCK buttons
6.1.1 Switching Inputs to Outputs
Inputs are routed to outputs differently for each of the four operation modes.
Incomplete operations on the VSM-4x4A timeout after 15 seconds.