Kramer 4 x 4 Seamless AV Matrix Switcher/Multi-Scaler - Manual (Page 51)

44 VSM-4x4A – Firmware Upgrade
7 Firmware Upgrade
You can upgrade the VSM-4x4A via the USB port on the rear panel or via the
Device Settings web pages (see Section 8.3.2 ).
The latest firmware version can be downloaded from the Kramer Web
site at
www.kramerav.com/downloads/VSM-4x4A .
To upgrade the firmware via the USB port:
1. Click Save on the lower part of the screen to save the device’s current
configurations (see Section 8.9 ).
2. Download the VSM-4X4A_vx.xx.BIN firmware and copy it to the root folder
of a memory stick, formatted with FAT32 system.
3. Disconnect the power from the VSM-4x4A .
4. Connect the memory stick to the USB port on the rear panel of the
VSM-4x4A .
5. Power the VSM-4x4A .
6. Press MENU on the front panel of the device.
7. Select ADVANCED > FIRMWARE USB UPGRADE > ON .
8. Press ENTER .
9. Wait until the device restarts following the upgrade process.
10. Disconnect the memory stick.
11. Perform factory reset.
12. Click Upload on the lower part of the screen to load device configurations
saved in step 1 (see Section 8.9 ).
13. Check that the firmware was updated.