Kramer 4 x 4 Seamless AV Matrix Switcher/Multi-Scaler - Manual (Page 59)

52 VSM-4x4A – Using the Embedded Web Pages
•
Set the output resolution separately for A and B via the resolution drop-down
box
•
Select the audio source
•
In the PIP mode, click a PIP position box to set the PIP location (top left, top
right, lower left or lower right) and the PIP Size drop-down box (Large,
Medium, Small or Off)
Figure 29: The Dual Tab – PIP Position and Size
8.2.3.1 Switching an Input to an Output
To switch an input to an output:
•
For POP: select the Left or Right on the A or B outputs
•
For PIP: select the MAIN or PIP on the A or B outputs
Click an input button to switch to the output.