Kramer 4 x 4 Seamless AV Matrix Switcher/Multi-Scaler - Manual (Page 37)

30 VSM-4x4A – Controlling the VSM-4x4A
Mode Function
In DUAL POP
Mode Select the input sources for the left and right sides of outputs A and the
left and right sides of outputs B:
VIDEO OUT A LEFT: IN 1, IN 2, IN 3 or IN 4
VIDEO OUT A RIGHT: IN 1, IN 2, IN 3 or IN 4
VIDEO OUT B LEFT: IN 1, IN 2, IN 3 or IN 4
VIDEO OUT B RIGHT: IN 1, IN 2, IN 3 or IN 4
Set the audio source for outputs A and outputs B (left or right for each
set):
AUDIO OUT A: LEFT or RIGHT
AUDIO OUT B: LEFT or RIGHT
In DUAL PIP
Mode Select the input sources for the MAIN and PIP sides of outputs A and
the MAIN and PIP sides of outputs B:
VIDEO OUT A MAIN: IN 1, IN 2, IN 3 or IN 4
VIDEO OUT A PIP: IN 1, IN 2, IN 3 or IN 4
VIDEO OUT B MAIN: IN 1, IN 2, IN 3 or IN 4
VIDEO OUT B PIP: IN 1, IN 2, IN 3 or IN 4
Set the audio source for outputs A and outputs B (MAIN or PIP for
each set):
AUDIO OUT A: MAIN or PIP
AUDIO OUT B: MAIN or PIP
Set the PIP parameters for outputs A and outputs B separately:
PIP A SIZE: SMALL, MEDIUM or LARGE
PIP A POSITION: RIGHT TOP, RIGHT BOTTOM, LEFT BOTTOM or
LEFT TOP
PIP A SWAP: swap the MAIN and PIP images (including the audio
signal)
PIP B SIZE: SMALL, MEDIUM or LARGE
PIP B POSITION: RIGHT TOP, RIGHT BOTTOM, LEFT BOTTOM or
LEFT TOP
PIP B SWAP: swap the MAIN and PIP images (including the audio
signal)
In QUAD Mode Set the input source for each QUAD:
VIDEO QUAD 1: IN 1, IN 2, IN 3 or IN 4
VIDEO QUAD 2: IN 1, IN 2, IN 3 or IN 4
VIDEO QUAD 3: IN 1, IN 2, IN 3 or IN 4
VIDEO QUAD 4: IN 1, IN 2, IN 3 or IN 4
Select the AUDIO SOURCE: IN 1, IN 2, IN 3 or IN 4
6.2.6 Storing and Recalling Setups (RECALL/STORE Menu)
Mode Function
RECALL/STORE STORE up to four input/output setups and RECALL them (all the
parameters are stored excluding the input/output labels and the
OSD setup)
The stored setups for each memory are also shown (FAV. 1 to
FAV. 4)
Use STORE to store the current setup to one of the four
memories (FAV. 1 to FAV. 4)
Use RECALL to select a stored setup