Kramer 4 x 4 Seamless AV Matrix Switcher/Multi-Scaler - Manual (Page 110)

VSM-4x4A – VSM-4x4A RS-232/Ethernet Communication Protocol 103
10.3.8.4 LABEL
Functions Permission Transparency
Set: LABEL
End User Public
Get: LABEL?
End User Public
Description Syntax
Set: Set input/output label
# LABEL SPstage,stage_id,switch,labelCR
Get: Get input/output label
# LABEL? SPstage,stage_idCR
Response
~nn@ LABEL SPstage,stage_id,switch,labelCR LF
Parameters
stage – 0 (input), 1 (output)
stage_id – for input: 1 (IN 1), 2 (IN 2), 3 (IN 3), 4 (IN 4); for output: 1 (OUT A), 2 (OUT B), 3 (OUT C), 4
(OUT D)
switch – 0 (Off), 1 (On)
label – A string of up to 12 characters
Notes
If stage_id is ignored and label string is empty, only do label on/off switch
K-Config Example
Set the IN 1 label to Blu-ray and turn it on:
“# LABEL 0,1,1,Blu-ray ”,0x0D
10.3.8.5 VIEW-MOD
Functions Permission Transparency
Set: VIEW-MOD End User Public
Get: VIEW-MOD? End User Public
Description Syntax
Set: Set view mode # VIEW-MOD SPmodeCR
Get: Get view mode # VIEW-MOD? SP
Response
~nn@ VIEW-MOD SPmodeCR LF
Parameters
mode – 0 (Seamless matrix), 1 (Dual PIP), 2 (N/A), 3 (Quad), 4 (2x2 Video wall), 5 (Dual POP), 6 (1x4
Video wall), 7 (Independent matrix)
K-Config Example
Set view mode to Quad:
“# VIEW-MOD 3 ”,0x0D