Kramer 4 x 4 Seamless AV Matrix Switcher/Multi-Scaler - Manual (Page 45)

38 VSM-4x4A – Controlling the VSM-4x4A
6.5 Controlling via the IR Remote Control
You can control the VSM-4x4A from the infrared remote control transmitter:
Figure 18: Infrared Remote Control
Transmitter
Keys Function
POWER Toggle the power save mode ON or
OFF
IDENTIFY Identify the inputs on each output
INFO Indicate on each output, which input is
displayed on the output
MUTE Toggle between muting (blocking out
the sound) and enabling the audio
output
MATRIX Set to Matrix mode (see Section 5.1 )
VID WALL Set to video wall mode (see
Section 5.2 )
DUAL Set to dual mode (see Section 5.3 )
QUAD Set to quad mode (see Section 5.4 )
STO Store a configuration
RCL Recall a configuration
Four navigation keys
OK Accept changes
MENU Enter the OSD menu
ESC EXIT the menu
ALL Select all the outputs
OFF Disconnect a selected input
TAKE Carry out a setup
OUT Select an output (A to D)
IN Select an input (1 to 4)
AUDIO Select the audio source (1 to 4)
For Dual and Quad modes only
1080p
Reset Reset the resolution to 1080p
XGA Reset Reset the resolution to XGA
Panel Lock Lock/unlock the front panel buttons