Kramer 4 x 4 Seamless AV Matrix Switcher/Multi-Scaler - Manual (Page 44)

VSM-4x4A – Controlling the VSM-4x4A 37
6. Select Use the following IP Address for static IP addressing and fill in the
details as shown in Figure 17 .
For TCP/IPv4 you can use any IP address in the range 192.168.1.1 to
192.168.1.255 (excluding 192.168.1.39) that is provided by your IT
department.
Figure 17: Internet Protocol Properties Window
7. Click OK .
8. Click Close .
6.4.2 Connecting the Ethernet Port via a Network Hub or Switch
You can connect the Ethernet port of the VSM-4x4A to the Ethernet port on a
network hub or using a straight-through cable with RJ-45 connectors.
6.4.3 Configuring the Ethernet Port
You can set the Ethernet parameters via the embedded Web pages (see
Section 8.3.1 ).