Kramer 4 x 4 Seamless AV Matrix Switcher/Multi-Scaler - Manual (Page 58)

VSM-4x4A – Using the Embedded Web Pages 51
8.2.3 Dual Operation Mode
Click Dual to display the Dual mode window and set Mode to one of the following
configurations:
•
POP
– Side-by-side images on the output (Left and Right)
Figure 27: The Dual Tab – POP Mode
•
PIP
– A PIP image over the main image on the output
Figure 28: The Dual Tab – PIP Mode
In the DUAL mode you can perform the following operations:
•
Switch an input to an output
– see
Section 8.2.3.1
•
Set the borders of an image to Show, Only Selected or Off
•
Edit the input label (see Section 8.2.5.1 )
•
Store and recall a setup (see Section 8.2.5 )