Kramer 4 x 4 Seamless AV Matrix Switcher/Multi-Scaler - Manual (Page 92)

VSM-4x4A – VSM-4x4A RS-232/Ethernet Communication Protocol 85
10.3.2.4 HDCP-STAT
Functions Permission Transparency
Set: - - -
Get: HDCP-STAT?
End User Public
Description Syntax
Set: None -
Get: Get HDCP signal status
# HDCP-STAT? SPstage,stage_idCR
Response
~nn@ HDCP-STAT SPstage,stage_id,modeCR LF
Parameters
stage – 0 (input), 1 (output)
stage_id – for input: 1 (IN 1), 2 (IN 2), 3 (IN 3), 4 (IN 4), * (All); for output: 1 (OUT A), 2 (OUT B), 3
(OUT C), 4 (OUT D), * (All)
mode – signal encryption On/Off status: 0 (Off), 1 (On)
Response triggers
Response is sent to the com port from which the Set (before execution) / Get command was received
Response is sent to all com ports after execution if HDCP-STAT was set by any other external control
device (button press, device menu and similar) or HDCP mode changed.
Notes
On output – sink status; On input – signal status. On Video outputs the HDCP-STAT response will tell us if
the SINK supports HDCP (and not if the actual signal is HDCP protected) and just in case a signal is sent
to the output. In case no Signal is routed to this specific output the status could be inaccurate or missing at
all.
K-Config Example
Get the output HDCP-STATUS of IN 1:
“#HDCP - STAT? 0,1”,0x0D
10.3.2.5 INFO-IO
Functions Permission Transparency
Set:
Get: INFO-IO? End User Public
Description Syntax
Set:
Get: Get IN/OUT count # INFO-IO? CR
Response
~nn@ INFO-IO? SPINSPinputs_count,OUTSPoutputs_countCR LF
Parameters
inputs_count – 4
outputs_count – 4
K-Config Example
Get the number of ports:
“# INFO-IO? ”,0x0D