Kramer 4 x 4 Seamless AV Matrix Switcher/Multi-Scaler - Manual (Page 80)

VSM-4x4A – VSM-4x4A RS-232/Ethernet Communication Protocol 73
10 VSM-4x4A RS-232/Ethernet Communication
Protocol
The VSM-4x4A 4x4 Seamless AV Matrix Switcher/Multi-Scaler can be operated
using the Kramer Protocol 3000 serial commands. The command framing varies
according to how you interface with the VSM-4x4A . In the following example, a
basic video input switching command that routes a layer 1 video signal to HDBT out
1 from HDMI input 2 ( ROUTE 1,1,2 ), is entered as follows:
•
Terminal communication software, such as Hercules:
The framing of the command varies according to the terminal
communication software. This command is used for demonstration
purposes only and its syntax may vary per device.
•
K-Touch Builder (Kramer software):