4 video commands, 1 vid-res, Ion 10.3.4 – Kramer 4 x 4 Seamless AV Matrix Switcher/Multi-Scaler User Manual
Page 97
90
VSM-4x4A
–
VSM-4x4A RS-232/Ethernet Communication Protocol
K-Config Example
Select the IN 2 video input to route output 1:
“#ROUTE 1,1,2”,0x0D
10.3.4
Video Commands
Command
Description
VID-RES
Set/get video resolution
VMUTE
Set/get video on output mute
10.3.4.1
VID-RES
Functions
Permission
Transparency
Set:
VID-RES
End User
Public
Get
VID-RES?
End User
Video
Description
Syntax
Set:
Set video resolution
#
VID-RES
SPstage,stage_id,is_native,resolutionCR
Get:
Get video resolution
#
VID-RES?
SPstage,stage_id,is_nativeCR
Response
~
nn@
VID-RES
SPstage,stage_id,is_native,resolutionCR LF
Parameters
stage
–
0
(Input),
1
(Output); under SET, stage
1
only
stage_id
– For Input:
1
(IN 1),
2
(IN 2),
3
(IN 3),
4
(IN 4); for output:
1
(OUT A),
2
(OUT B),
3
(OUT C),
4
(OUT D),
*
(ALL);
NOTE
: for the Seamless Matrix, Video Wall and Quad modes, the resolution on all the outputs is the
same; for the Independent Matrix mode, each output can have a different resolution; for the Dual mode,
Dual A and Dual B can have different resolutions
is_native
–
0
(Off),
1
(On)
NOTE
: Under SET
is_native
is ignored
resolution
–:
0-63
(see
Section 10.3.10
Response triggers
•
After execution, response is sent to the com port from which the
Set /Get
was received
•
After execution, response is sent to all com ports if
VID-RES
was set by any other external control
device (button press, device menu and similar)
Notes
1.
The “Set” command is only applicable when
stage
=
1
(Output)
2.
The “Set” command with
is_native
=
1
(On), sets the native resolution on the selected output
(resolution index sent = 0). The device sends as an answer the actual VIC ID of native resolution.
3.
The “Get” command with
is_native
=
1
(On) returns the native resolution VIC;
when
is_native
= 1 (Off), it returns the current resolution
K-Config Example
Set video resolution on output to
1400x1050 @60Hz
:
“#VID
-RES 1,1,0,4
4”,0x0D