Kramer 4 x 4 Seamless AV Matrix Switcher/Multi-Scaler - Manual (Page 35)

28 VSM-4x4A – Controlling the VSM-4x4A
6.2.3 Configuring Output Parameters (OUTPUT Menu)
Mode Function
RESOLUTION
A to D Set the output resolution to NATIVE (default), 480p, 576p, 720p50,
720p59, 720p60, 1080p24, 1080p50, 1080p60, 1024x768,
1280x800, 1280x1024, 1366x768, 1440x900, 1600x900,
1680x1050 or 1920x1200
The NATIVE resolution is read from OUT A. If the FW
cannot detect the OUT A native resolution or if it is not
supported, the resolution defaults to 1080p60
Seamless Matrix mode Set resolution on A
Applies to outputs A, B, C and D
Independent Matrix
mode Set resolution separately for A, B, C and D
Dual PIP mode Set resolution A for dual A (outputs A and
B)
Set resolution C for dual B (outputs C and
D)
Dual POP mode Set resolution A for dual A (outputs A and
B)
Set resolution C for dual B (outputs C and
D)
Video wall 4x4, 1x4 Set resolution on A.
Applies to outputs A, B, C and D
QUAD mode Set resolution on A.
Applies to outputs A, B, C and D
ASPECT RATIO Set to Full, 4:3, 16:9 or Best Fit(default)
BORDERS Available only for the DUAL and QUAD operation modes
Set to Show (all the borders), Only Selected (only the selected
output, default) or OFF
If Show is selected (a border around each image), the selected
output’s border appears slightly thicker
BORDER COLOR Select RED, GREEN (default), BLUE, YELLOW, MAGENTA or
GREY
INPUT LABELS Set input labels to ON or OFF (default)
By default the label is set to Source 1 for input 1, Source 2 for input
2 and so on
Note that the labels can be changed via the Web pages or RS-232
commands
OUTPUT LABELS Set output labels to ON or OFF (default)
By default, labels are set to Output1, Output 2 and so on
Note that the labels (up to 12 characters) can be changed via the
Web pages or RS-232 commands
BEZEL
CORRECTION In the Video Wall operation mode, use bezel correction to
compensate for the video wall monitor rims which create a non-
continuous image across the video wall
Set to OFF (default) or ON for the Video Wall operation mode only