Kramer 4 x 4 Seamless AV Matrix Switcher/Multi-Scaler - Manual (Page 34)

VSM-4x4A – Controlling the VSM-4x4A 27
6.2.2 Configuring Picture Parameters for each Mode (PICTURE Menu)
Mode Function
Note that the PICTURE menu changes in accordance with the operation mode
In SEAMLESS
MATRIX Mode For both Matrix modes, set the CONTRAST, BRIGHTNESS,
SATURATION and HUE on all the outputs (the settings are the same
for all the outputs)
RESET ALL the PICTURE parameters to their default values
In
INDEPENDENT
MATRIX Mode For both Matrix modes, set the CONTRAST, BRIGHTNESS,
SATURATION and HUE separately for OUT A, OUT B, OUT C and
OUT D
RESET each parameter (CONTRAST, BRIGHTNESS,
SATURATION or HUE) for all the outputs.
RESET ALL the PICTURE parameters to their default values
In VIDEO WALL
Mode For both Video Wall modes, set the CONTRAST, BRIGHTNESS,
SATURATION and HUE separately for OUT A, OUT B, OUT C and
OUT D
RESET each parameter (CONTRAST, BRIGHTNESS,
SATURATION or HUE) for all the outputs
RESET ALL the PICTURE parameters to their default values
In DUAL POP
Mode Set the CONTRAST, BRIGHTNESS, SATURATION and HUE
separately for the LEFT and RIGHT images of the A outputs, and the
LEFT and RIGHT images of B outputs
RESET each parameter for all the outputs
RESET ALL the PICTURE parameters to their default values
In DUAL PIP
Mode Set the CONTRAST, BRIGHTNESS, SATURATION and HUE
separately for the MAIN and PIP images of the A outputs and the
MAIN and PIP images of B outputs
RESET each parameter for all the outputs
RESET ALL the PICTURE parameters to their default values
In QUAD Mode Set the CONTRAST, BRIGHTNESS, SATURATION and HUE
separately for QUAD 1, QUAD 2, QUAD 3 and QUAD 4
RESET each parameter for all the QUADs
RESET ALL the PICTURE parameters to their default values