Kramer 4 x 4 Seamless AV Matrix Switcher/Multi-Scaler - Manual (Page 30)

VSM-4x4A – Controlling the VSM-4x4A 23
6.1.1.3 Disconnecting All the Inputs from the Outputs
This feature is available for all operation modes except the video wall
mode.
To disconnect all the inputs from the outputs:
1. Press ALL .
2. Press OFF .
All the inputs are disconnected from all the outputs.
6.1.2 Using the TAKE Button
You can choose to work in the At Once or the Confirm mode:
•
In the At Once mode, pressing an output-input combination implements the
action immediately
•
In the Confirm mode, pressing the TAKE button activates the switching
operation
The At Once Mode
In the At Once mode, execution is immediate and actions require no user
confirmation. However, no protection is offered against changing an action in error.
The Confirm Mode
In the Confirm mode:
•
You can enter several actions and then confirm them by pressing the TAKE
button to simultaneously activate the multiple switches
•
Every action requires user confirmation which protects against erroneous
switching
•
Execution is delayed until the user confirms the action
If the TAKE button is not pressed within 60 seconds, this action is aborted.