Kramer 4 x 4 Seamless AV Matrix Switcher/Multi-Scaler - Manual (Page 47)

40 VSM-4x4A – Controlling the VSM-4x4A
Note that the letters that appear in brackets in the following pages
refer to the same letters that appear in brackets in
Figure 19 .
To use the Dual mode shortcuts :
1. Press the DUAL button to select the DUAL operation button (c) .
2. Press the DUAL button again to select the PIP or POP mode (d) .
To select the inputs to switch to the outputs :
1. Select an output:
▪
PIP A: press OUT A/OUT B to select the Main/PIP window for A (e)
▪
PIP B: press OUT B/OUT C to select the Main/PIP window for B (f)
▪ POP A: press OUT A/OUT B to select the Left/Right window for A (e)
▪ POP B: press OUT C/OUT D to select the Left/Right window for B (f)
2. Select the input to switch to the output:
▪ Press one of the inputs (IN 1 to IN 4) to switch to the selected output (g)
For PIP/POP A: