Henny Penny OEA/OGA-323 User Manual
Page 42
Model OFE/OFG-321,322,323,324
3-14. CHANGING THE FILTER
3.
Remove cover from filter drain pan and lift the filter
ENVELOPE
screen assembly from the drain pan.
(Continued)
4.
Wipe the shortening and crumbs from the filter drain pan.
Clean the drain pan with soap and water. Thoroughly rinse
with hot water.
5. Unthread the standpipe from the filter screen assembly.
6.
Remove the crumb catcher and clean with soap and water.
Rinse thoroughly with hot water.
7.
Remove the filter clips and discard the filter envelope.
8.
Clean the top and bottom filter screen with soap and water.
Rinse thoroughly with hot water.
Be sure that the filter screens, crumb catcher, filter clips
and the standpipe are thoroughly dry before assembly of the
filter envelope or water will dissolve the filter paper.
9.
Assemble the top filter screen to the bottom filter screen.
10. Slide the screen into a clean filter envelope.
11. Fold the corners in and then double fold the open end.
12.
Clamp the envelope in place with the two filter retaining
clips.
13.
Replace the crumb catcher screen on top of the filter paper.
Screw on the standpipe assembly.
14.
Place complete filter screen assembly back into filter drain
pan, replace cover, and slide pan back into place beneath the
open fryer.
15. Connect the filter union by hand. Do not use a wrench to
tighten.
16. The open fryer is now ready to operate.
3-22
703