Henny Penny OEA/OGA-323 - Manual (Page 58)

Model OFE/OFG-321,322,323,324
4-3. SPECIAL PROGRAM
MODE (Continued)
Cooking is still permitted during the “suggested” phase.
However, if lockout is enabled, and the fryer still has
not been filtered after one hour, then the controller
activates lockout mode and prompts “FILTER
LOCKOUT – YOU *MUST* FILTER NOW”.
j. Press the PROG button and “SP-9E” “SKIP IF
LESS THAN...” shows in the display, followed by the
number of loads between filters, ex: “LOAD 4”. In
this example, if the suggested filter time occurs, before
4 loads have been cooked, then the filter operation is
skipped. If more than 4 loads have been cooked, then
“Filter Suggested” shows in the display. The numbers
of loads can be set by using the Up and DOWN buttons.
k. Press the PROG button and “SP-9F” shows in the
display, followed by “LOCKOUT ENABLED?” Press
the UP or DOWN buttons to choose “YES” or “NO”.
m. Press the PROG button and “SP-9G” shows in the
display followed by SP-9G "LOCKOUT - HEAT
OIL..." and a shortening temperature, when reached,
allows the operator to filter. Example, "LOCKOUT -
HEAT OIL... 300F” means the display shows
"FILTER LOCKOUT" "WAIT", until 300F is reached,
then display shows "FILTER LOCKOUT"/"YOU
*MUST* FILTER NOW", and repeated high-low tones
are activated. This prompts the user that it is now time
to filter the shortening. Press and release the UP and
DOWN arrows to change
Product Buttons (SP-10)
This mode allows you to set up the way the product
buttons are displayed in the Cook Cycle.
a. Follow steps 1 and 2 above.
b. Press and release the PROG button until “SP-10” and
“PRODUCT BUTTONS” flash in the display.
c. The first option, “1,COOK”, displays only the
product button that is selected. When nothing is
cooking, no product will be displayed. Products 1, 2,
and 3 display on the left timer only, and products 4, 5,
and 6 display on the right timer only. (1 to 6 on the
left timer only, and 7 to 12, for 12 product controls)
The product button starts the cook cycle.
d. The second option, “2,L+R” (“2,SELECT” for 12
product controls), automatically displays the product
button selected in both timer displays. The timer
buttons starts the cook cycle.
4-10 1005