Henny Penny OEA/OGA-323 - Manual (Page 45)

Model OFE/OFG-321,322,323,324
17. Replace the clean filter screen assembly in the drain
pan, replace cover, and install filter drain pan under
open fryer.
18. Refill the frypot with fresh shortening.
Henny Penny has the following cleaners available:
Foaming Degreaser - Part no. 12226
PHT Liquid Cleaner - Part no. 12135
PHT Dry Powder Cleaner - Part no. 12101
See your local distributor for details.
3-16. CLEAN-OUT MODE When heating the cleaning solution and vinegar solutions,
(6 & 12 Product Controls Only)
turn the POWER switch to the ON position. When the fryer
starts the Melt Cycle, press and hold then
“CLEAN-OUT ?”, “1=YES 2=NO” shows in display.
Press to start Clean-Out Mode. The fryer displays
“*CLEAN-OUT MODE*” and heats up to a
preprogrammed temperature, up to 195˚F (91˚C), then
automatically begins a preset timed countdown. Use
the buttons, if necessary, to adjust the temperature
and keep the cleaning solution from boiling over.
Once the timed countdown is complete and display shows
“CLEANING DONE”, refer back to the Cleaning the Frypot
procedures for more detailed instructions.
See Special Program Modes SP-20 and SP-21 to preset
the temperature and time.
208 3-25
3-15. CLEANING
THE FRYPOT
(Continued)