HP 250C - Manual (Page 156)

8Ć22 Troubleshooting C4699Ć90000
Filename Failure
(and most frequent causes)
Line Number
Filename Failure
(and most frequent causes) Firmware
A.01.05
Firmware
A.01.04
Firmware
A.01.03
mechanics.c 247 247 247 Mechanical problem when the
carriage attempts to position itself
over the service station. Check the
mechanics.
eerom.c - 458
or 1232
458
or 1232
EEROM test failed:
D See ' page 8Ć27, w EEROM
errors.
servo.c - 412 412 YĆaxis servo error (carriage movement):
D Obstacle or friction in YĆaxis.
D Motor cable disconnected.
D Faulty carriage motor, or motor
cable pinched.
D Faulty encoder strip.
D Faulty carriage.
D Faulty electronics module.
servo.c - 417
or 431
417
or 431
XĆaxis servo error (roll movement):
D Obstacle or friction in XĆaxis.
D Motor cable disconnected.
D Faulty media motor, or motor
cable pinched.
D Faulty electronics module.
bnixsystem.c - 2729 - Centronics/Bitronics communication
error:
D Centronics cable badly connected.
D Problem with host computer.
D Faulty electronics module.