HP 250C - Manual (Page 248)

GlossaryĆ6 C4699Ć90000
SIMMąSingle InĆline Memory Module.
skewąMisalignment.
special paperąA paper specifically
developed by HP, for HP inkjet plotters.
SPROCąServoĆProcessor Code.
swathąThat portion ofa drawing plotted
between advances ofthe drive roller in Fast
mode. (In Best mode, the drive roller
advances halfa swath at a time; in Normal
mode, it may advance a full swath or half a
swath, depending on whether the plot is
color or monochrome.)
TCP/IPąTransmission Control Protocol /
Internet Protocol.
thetaĆZ errorąA printĆquality error
caused when the nozzles on a cartridge are
not perpendicular to the carriage axis. The
error shows up as jagged vertical lines.
translucentąDescribes a type ofmedia
through which light passes.
TTOEąThermal TurnĆOn Energy.
UARTąUniversal Asynchronous Receiver
Transmitter.
unidirectional print modeąA print
mode in which plotting is performed while
the carriage moves in one direction, and no
plotting is performed while the carriage
moves in the opposite direction.
vellumąA type ofstrong paper.
VLSąVerticalĆline straightness.
XĆaxisąMedia axis.
XĆaxis calibrationąAccuracy calibration.
YĆaxisąCarriage axis.