HP 250C - Manual (Page 160)

8Ć26 Troubleshooting C4699Ć90000
Filename Failure
(and most frequent causes)
Line Number
Filename Failure
(and most frequent causes) Firmware
A.01.00
eerom.c 220 or
260 or
291 or
325 or
355 or
399 or
443 or
483 or
527 or
554
EEROM test failed:
D See ' page 8Ć27, w EEROM errors.
servo.c 412 or
426
YĆaxis servo error (carriage movement):
D Obstacle or friction in YĆaxis.
D Motor cable disconnected.
D Faulty carriage motor, or motor cable
pinched.
D Faulty encoder strip.
D Faulty carriage.
D Faulty electronics module.
servo.c 417 or
431
XĆaxis servo error (roll movement):
D Obstacle or friction in XĆaxis.
D Motor cable disconnected.
D Faulty media motor, or motor cable
pinched.
D Faulty electronics module.
bnixsystem.c 2292 or
2414 or
2449 or
2750
Centronics/Bitronics communication error:
D Centronics cable badly connected.
D Problem with host computer.
D Faulty electronics module.