HP 250C - Manual (Page 89)

6Ć31 Removal and Replacement C4699Ć90000
Removing the EngagingĆLever
Support
1 Remove the primer ' page 6Ć27.
2 Remove the service station ' page 6Ć28.
3 Release the cable from the engaging lever
support ' page 6Ć29.
4 Remove the engaging lever.
5 Remove the spring from the engagingĆ
leversupport.
6 Remove the three screws that attach the
support to the left sideĆplate.
Torx-10 Torx-20
+
7 Pull the support upwards and remove it
from the plotter.