Fuji Bikes FRENIC 5000G11S/P11S - Manual (Page 125)

10-1
10. Options
10-1 Built-in Options
The inverter supports two internally mounted cards. One option card is mounted under the main cover
(Location A) and the other option card is mounted in a special adapter under the keypad (Location B). Only
one card can be mounted in these locations. There are two different types of option cards, Type 1 and Type 2.
You cannot use two Type 1 or Two Type 2 cards but you can mix any combination of Type 1 and Type 2
provided you only have one option per mounting location. Each option card must be mounted in the
designated location. The chart below lists the option card, their types, and their mounting locations.
Name Type Loc
2nd Option
Type/Loc
Function
OPC-G11S-RY
(Relay output card) 1 A 2/B • Relay output card
The transistor output from the inverter control output
terminals Y1 and Y4 are converted to the relay
output (1SPDT).
OPC-G11S-DIO
(Digital interface card) 2 A None • Frequency setting by binary code (max. 16 bits)
• Monitoring (8 bits) of frequency, output current, and
output voltage
OPC-G11S-AIO
(Analog interface card)
2 A None • Auxiliary input for analog frequency setting (0 to
+/-10 V)
• Monitoring of inverter output frequency, current, and
torque in analog voltage, analog output 0-10 VDC
and 4-20mA
OPC-G11S-PG
(PG Feedback Card)
(G11S only) 1 A 2/B • This will enable vector control by pulse generator
feedback signal
• Proportional operation, tuning operation (12/15 V; A,
B Signal)
OPC-G11S-PG2
(PG Feedback Card)
(G11S only) 1 A 2/B • This will enable vector control by pulse generator
feedback signal
• Proportional operation, tuning operation (5V; A, not
A, B, not B Signals)
OPC-G11S-SY
(Synchronized operation card)
(G11S only) 1 A 2/B • Two motors are driven synchronously.
OPC-G11S-PDP
(Communication card) 2 B 1/A • Serial communication card for Profibus-DP
OPC-G11S-DEV
(Communication card) 2 B 1/A • Serial communication card for Device Net
OPC-G11S-COP
(Communication card) 2 B 1/A • Serial communication card for CAN
OPC-G11S-MBP
(Communication card) 2 B 1/A • Serial communication card for Modbus plus
OPC-G11S-IBS
(Communication card) 2 B 1/A • Serial communication card for Interbus-S