Fujimoto Fuji Differential Pressure Transmitter FKK 4 - Manual (Page 19)

13
Important
The unit of industrial value is set according to the range as ordered, but the display
resolution lowers depending on the unit being set.
When
is displayed upon changing the unit of industrial value, output cannot be displayed in the
engineering unit selected.
In this case, press the CL key and change the engineering unit to a different one.
4-1:UNIT CHANGE
Pa
NOT SUITABLE
UNIT <CL>
DEC INC
mmH O 2
cmH O 2
mH O 2
g/cm 2
Pa
inH O
2
psi
ftH O 2
< Torr >
kg/cm 2
< atm >
hPa
kPa
MPa
mbar
bar
mmAq
mmHg
cmAq
mAq
mmWC
cmWC
mWC
inHg
cmHg
mHg
Industrial value unit
Available unit for FCX-C2
< UNIT CHANG >
4-1: UNIT CHANGE
kPa
< INC > < ENT > < CL >
4-1: UNIT CHANGE
CHNG OK? < ENT/CL >
4-1: UNIT WRITE
< INC >
4: UNIT
To menu N° 5 :
RANGE LIMIT
kPa
< CHNG >
(NEXT MPa)
(NEXT MPa)
kPa
kPa
4-1: UNIT WRITE
UNIT < CL >
NOT SUITABLE
Not suitable unit display
Pa
Menu N°3 :
SERIAL N°
CL
CL
CL
INC
INC
CHNG
ENT
ENT
1
2
3
4
INC
Note: The mark < > is settable for abso-
lute pressure transmitter only.
• When pressing <CHNG>
under display 1 , the display
for changing the unit of
industrial value
2 appears.
• The desired unit of industrial
value is selectable by using
<INC> or <DEC> under
display
2 .
• Display 3 is provided for con-
firming your change.
• Display 4 is for registering the
unit of industrial value.