Fujimoto Fuji Differential Pressure Transmitter FKK 4 - Manual (Page 47)

41
5.4 Adjustment after replacement of unit
After completion of the assembly work mentioned above, use the following procedures for adjust-
ment and setting. Adjustment should be performed using the HHC.
(1) After replacement of electronics unit (including replacement of internal parts)
( 2) After replacement of detecting unit (including replacement of internal parts)
Adjustment
S tep Adjustment item Relevant page
1 Constant current output (output circuit) P19
2 TAG. No. P11
3 Type P12
4 Industrial value unit P13
5 Range (zero/span) P14
6 Zero/span adjustment P18
7 Damping P15
8 Output mode (LIN/ selection) P16
9 Burnout direction P17
10 Lock of adjustment function P22
Step Adjustment item Relevant page
1 Range (zero/span) P14